Mini USB 1602 LCD 5v Lc100-a Precise Electronic Inductance Capacitance Meter

Direction for use: (1).Switch on the L/C Meter (2).Chose the corresponding files, inductance: Lx, capacitance: Cx, big inductance: HL, big capacitance: HC. Display as follows (testing terminal open loop): Inductance:MEASURE Lx OVER RANGE Capacitance:MEASURE Cx 0.00pF Big inductance:MEASURE Hi.L OVER RANGE Big capacitance:MEASURE Hi.C 0.00pF Display as follows( testing terminal short circuit): Big inductance:MEASURE Hi.L 0.000mH Inductance:MEASURE Lx 0.000uH Capacitance:MEASURE Cx OVER RANGE (3).When testing terminal open loop the measured value of capacitance is not "0", or witch of the inductance is not "0" as the testing terminal short circuit, you can reset to "0" by ways of capacitance model and inductance model, as follows: (a) Capacitance model Press red button as testing terminal open loop, it displays "CALCULATING…", keep pressing for one second, when "CALCULATING…OK" displayed, resetting to "0" is finished, and "0.00pF" is displayed, then capacitances can be measured. (b) Inductance model Press red button as testing terminal shirt circuit, it displays "0.000uH" or "0.000mH", and then inductances can be measured. (4). Please press black function button as results displayed, and corresponding frequency will be displayed. Note: 1. Please reset to "0" before testing a capacitance or an inductance, or errors may be appeared. Even if "0" displayed before measuring, resetting to "0" is needed. 2. At the time of resetting to "0", when"CALCULATING…OK" appeared, please keep pressing for 2 to 3 seconds, and the parameter written to "(DATA SAVED)" will be prompted, then release. 3. Resetting to "0" is forbidden as components are being measured. If you do it, please shut down immediately and restart, then reset to "0". 4. The time of measuring : above 10mF need more than 1 second.100mF needs 7-8 seconds to get the measured value of the capacitance.

• Mini USB 1602 LCD 5V LC100-A Precise electronic Inductance Capacitance meter